PWN Series – PCB Wet-Chemical Tin Immersion Process

Machines of the PWN Series enhance the solderability by depositing a tin layer on the area where the components are bonded. The integrated production line disposes of a horizontal conveyor system and comprises following process steps: loading and unloading, cleaning, rinsing, micro-etching, pre-dip, immersion tin, drying.

FEATURES

  • Uniform immersion tin layer, no color difference, no roller marks, water marks or scratches
  • Completely eliminated whisker risk
  • No dirt or residual chemicals after wet-cleaning
  • High conveying stability with deviation of only ± 10 mm (with width control device)
  • Equipped with automatic control system to guarantee stable process parameters

ADVANTAGES

  • Over 95 % modularized products
  • Excellent squeeze roller design with drag-out of ≤ 10 cc/m² to prevent chemical drag-out and contamination
  • Sloped-bottom tanks for chemical processes to minimize solution leftover
  • Sloped-bottom and small-volume tanks for rinsing process to improve tank turnover rate by 50 %

TECHNICAL DATA

Dimension:

max. 610 x 610 mm
min. 250 x 250 mm

Panel thickness:

0.1 mm - 3.2 mm traditional PCB
0.8 mm - 12 mm backboard

Bore diameter:

Through-hole: min. 0.1 mm A/R 10:1
Blind hole: min. 0.075 mm A/R 1:1


Additional data available on request.

Back to overview