PWD Series – PCB Wet-Chemical R2R Developing
Roll-to-roll (R2R) developers of the PWD Series completely remove dry films, wet films or ink which have not been exposed. Our R2R-developers for the production of FPCs are matched with stripping and etching processes and comprise following process steps: winding and unwinding, developing, (descum) rinsing and drying.
FEATURES
- Excellent resolution capability, no residue of dry or wet film
- Equipped with automatic control systems to ensure longest uptime
- Single-track or double-track conveyor can be selected according to production capacity and process requirements
ADVANTAGES
- Modularized design: tension or dancer rollers can be selected according to the process requirements to avoid deforming
- Robust body structure to maintain parallel position of rollers during long term operation
- Superior Edge Position Control (EPC) to ensure an even and straight rolling
- Developing section disposes of excellent defoamer technology
- Sloped-bottom and small-volume tanks for rinsing processes to improve tank replacement rate by 50 %
TECHNICAL DATA
Specifications of substrates: |
|
Panel width: |
250 – 600 mm (can be customized for different sizes) |
Panel thickness: |
12.5 μm – 25 μm or thicker |
Dia. of through hole: |
min. 0.1 mm A/R 10:1 |
Dia. of blind hole: |
min. 0.075 mm A/R 1:1 |
Resolution capability: |
25/25 μm |
R2R performance: |
|
Normal operating time (uptime): |
≥ 95 % |
Mean repair time (MTTR): |
4 h |
EPC permissible edge alignment: |
± 0.5 mm |
Low-tension control: |
5 N – 30 N |
Additional data available on request.